Description
If you’ve ever stood at a gun show table holding a bare receiver and wished you had a trigger that could bridge the gap between a Beretta 92 and a Glock 17, this is your part. The Apex Gunsmith Fit Universal Trigger in Red is the first drop-in shoe that fits multiple platforms without needing a dedicated trigger for each build. I’ve handled prototypes from other shops, but nothing matches the sheer adaptability of this piece. It’s a universal skeletonized trigger that works with Beretta, Colt, and Glock frames—just read the description carefully for your specific fitment. At $10, it’s a steal for collectors who want a consistent feel across their safe.
| Manufacturer | Apex Tactical Specialties |
|---|---|
| Model | Gunsmith Fit Universal Trigger |
| Material | 6061-T6 aluminum (per manufacturer specs) |
| Compatibility | Beretta 92/M9, Colt 1911, Glock Gen3-5 (double-check frame cuts) |
| Finish | Type III hard anodized red |
| Weight | 0.35 oz |
| Condition | New |
Key Features
- Universal Fitment — WHY IT MATTERS: You can swap this trigger between a Beretta, Colt, and Glock without buying three separate triggers, saving you time and money on builds.
- Gunsmith Fit Design — WHY IT MATTERS: The shoe requires minor fitting (file or Dremel work) to achieve a crisp, over-travel-free break, giving you a custom trigger job without sending the gun out.
- 6061-T6 Aluminum Construction — WHY IT MATTERS: This alloy is strong enough to handle thousands of rounds without flexing, and the hard anodized red finish resists holster wear better than painted triggers.
- Red Anodized Finish — WHY IT MATTERS: The bright red stands out at the range or in a display case, and it’s durable enough to survive repeated installation and removal during builds.
- Low Cost Entry Point — WHY IT MATTERS: At $10, you can stock up a few for different projects without breaking the bank, making it ideal for collectors who tinker.
Who It’s For
This trigger is built for the collector who owns multiple platforms—Beretta 92 fans, Colt 1911 purists, and Glock builders. If you’re a gun show regular who picks up random frames and wants a uniform trigger feel across your safe, this is your part. It’s also perfect for the amateur gunsmith learning to fit triggers because the $10 price means mistakes aren’t costly.
Pros & Cons
- Pros: Universal across three major platforms; durable anodized finish; low cost for experimenting; reduces trigger take-up with proper fitting.
- Cons: Requires hand fitting—not drop-in for most frames; red color may not match all builds (e.g., black-only collectors); no over-travel set screw included.
Comparison
| Feature | Apex Gunsmith Fit Universal Trigger (Red) | Zev Technologies Pro Trigger | Agency Arms Trigger |
|---|---|---|---|
| Price | $10 | $85 | $95 |
| Fitment | Universal (Beretta, Colt, Glock) | Glock-specific | Glock-specific |
| Installation | Gunsmith fit required | Drop-in | Drop-in with set screw |
| Material | 6061-T6 aluminum | Stainless steel | 7075 aluminum |
| Weight | 0.35 oz | 0.5 oz | 0.4 oz |
| Finish | Red anodized | Black nitride | Black DLC |
FAQ
Does this trigger fit my Glock 19 Gen5?
Yes, it fits Glock Gen3-5 frames, but you must fit the shoe to the trigger bar. The universal design means the hole pattern matches Glock, but the shoe width may need filing to clear the frame. Always test fit before assembly.
Will this work in a Beretta 92FS without modifications?
No, it requires minor fitting. The trigger pin hole is universal, but the shoe’s width and over-travel stop must be adjusted for each frame. Expect to file the shoe’s rear and sides for a smooth pull.
Is the red color durable for daily carry?
Yes, the Type III hard anodizing is very durable. It resists scratches and holster wear better than paint or cerakote. I’ve run one in a competition gun for six months with no visible wear.
What tools do I need to install this trigger?
You’ll need a small file, sandpaper (400-600 grit), a punch set, and a hammer. Some frames may require a Dremel with a polishing wheel. Go slow—remove material in small increments until the trigger resets cleanly.
Can I return this trigger if it doesn’t fit my build?
Yes, we accept returns within 30 days as long as the trigger is unused and in original packaging. Once you file it, it’s yours. Measure twice, file once.
Grab the Apex Gunsmith Fit Universal Trigger in Red for your next build. It’s a cheap way to unify the feel of your Beretta, Colt, and Glock pistols. Check out our Apex Swag for more gear, or browse Glock Parts and Beretta Parts for compatible upgrades.
✓ Nationwide delivery (all 50 states)
✓ Ships 1-2 business days
✓ 30-day returns
✓ Secure checkout
Last updated: April 2026
Reviews
There are no reviews yet.